Rubber Vacuum Exposure Unit Blanket 49" x 60" (Baselayr & X-Vactor Compatible) exposure unit accessories

Rubber Vacuum Exposure Unit Blanket 49" x 60" (Baselayr & X-Vactor Compatible) exposure unit accessoriesVacuum exposure unit blankets rip from time to time after years of use. This is an economic way to replace your vacuum exposure blanket without breaking the bank or ordering parts from the manufacturer. Most vacuum exposure lid frames unbolt or unscrew and allow you to replace the rubber blanket inside. This is one piece cut to 49" x 60" 3mm Standard Black Rubber Baselayr and X Vactor Compatible NOTE: There is a no return policy on this item.

Six-stage water filtering process catches waste ranging from the largest emulsion pieces to the tiniest ink particles

At the end of the discharge process and during cure

For more aggressive cleaning or dried screens

but can also stick to plastisol inks if printed and cured properly

WILFLEX™ Epic Rio Plastisol Ink Mixing System is a low cure non-phthalate finished ink mixing system formulated for a perfect balance of color accuracy and opacity for peak press performance and color design

If printing on polyester or dye-migrating fabrics

1 year parts warranty

Energy saving 4hr sleep mode

For extended screen life and long print runs it is recommended to post-expose the screens and/or use an emulsion hardener like Baselayr Hardener

End caps are precision laser cut out of 16 gage stainless steel and allow "home-made" thick film stencils to be created inexpensively using regular emulsion

it’s recommended to create your own base with 80% Clear Core and 20% Opaque Core

Recommended to add 10% Flare Base for better wash fastness