12 String Trapeze Tailpiece Option:Nickel

12 String Trapeze Tailpiece Option:NickelThis tailpiece was traditionally used on 12 string thinline archtop instruments such as the 12 string Gibson ES 335 made between 1965 and 1970. Please make sure to check the specs to see if they match your instrument to verify that it is the correct replacement. IMPORTANT SPECS AND DIMENSIONS: Tailpiece Length (without hinge): 119. 7mm (4. 71in) Length of Bar: 83. 9mm (3. 30in) Width of Bar: 19mm (0. 75in) String Spacing at Bar: 9. 33mm (0. 13in)

the Moderne was originally intended to be the sibling of the Flying V and Explorer but never made it off of the launch pad

2) Two Push Button Holes Only

Bass + - 15dB at 80Hz

Please note that this pickguard will only fit American Performer Precision Bass instruments

Diameter of tuning holes - 17

The brass saddles create the classic bright sound

making it a strong choice for rock

These are original equipment Floyd Rose tremolo arms

Gotoh" stamped on the rear casing

95 millimetres)

5mm thick and comes with a 45 degree bevelled edge:

expressive mids