Connodale torque arms Trek torque arm

Connodale torque arms Trek torque armMaterial is stainless steel. Each torque arm is supplied with one m5 bolt. As far as I know it fits all connodale trail frames EXCEPT connodale trail 2 frames M14 and m16 axle sizes available . I raccomend having a torque arm on each side, especially for setups of 2000w and above

this is a no brainer EXCEPT you need to make sure your battery has a 80A or higher BMS which not many batteries do

Basically all forks woth a 20mm axle and 110mm spacing

M14 and m16 axle sizes available

14×10mm axle so will require 14mm torque arms (see my torque arms section for custom torque arms if needed)

If any questions on this or any other regards feel free to contact me

If you are planning on using only or mostly pedal assist

35mph on 52v

rockshox boxxers

-Controller bag

-Kt lcd3 display

20×110 hub suitable for all modern triple clamp forks including fox 40s

10 gauge stainless steel spokes